Files
dsh 1e7acc018e hardware: the 74LS machine gets a period bill of materials, and a mechanics plan
Two things: the TTL build is now the main target (Tang Nano looks too modern), and
the packer learned the format that makes the TTL build simple.

Format: r8forge_tape_pack --eprom writes one byte per instruction with the opcode
in the low three bits.  Then ip is the EPROM address and D2..D0 are the opcode --
no shift register, no 16 bit window, no decoder.  It wastes five bits per
instruction, and a 27C512 is exactly 64K, which is the historical instruction
budget: the 8 bit calculator (51378) and the flagship (43676) both fit.  Both
formats live in the same .r8t trailer now (format byte 1 = packed, 2 = one byte
per instruction), decode dispatches on it, and the test runs both and requires
the same output and step count.

Carrier: 74LS DIPs on a green board, 27C512 in a socket with its quartz window,
6116 SRAM, 74LS299 for the rotate, 6850 ACIA for serial, 74LS47 and four seven
segment displays on the panel, 1 MHz can oscillator.  About 31 to 40 chips, 400
to 700 CNY, a few weeks.  The FPGA stays as a bench-only stepping stone.

hardware/mechanics.md: where mechanics actually pays.  The program must stay
electronic (130 metres of paper tape for the calculator), and 512 relays for the
data ring are out, but the pointer is worth it -- > and < are 71 to 73 percent of
all steps, so a 64 position ratchet or uniselector makes the machine physically
walk the ring.  Also listed: an electromagnetic step counter (10 to 20 Hz, so
only in single step mode, with a clutch for free running), a paper tape punch or
plotter for output, a tape/card reader or plain keypad for input, and a hand crank
as the clock.  The rule that keeps this safe: mechanics only ever sit on sensor
and actuator pins and never in the logic path, and the handshake just stops the
sequencer while something moves -- since nothing in the ISA can observe time,
slower is not different.  A relay-only machine is priced honestly too: 60 to 120
relays, 10 to 50 Hz, hello in 10 to 40 seconds, the calculator in four hours, so
that one is an exhibit.

Also fixed: the synthesised macro fallback file name now carries a per-run token.
When the system temp directory is not writable every r8asm falls back to the same
working directory, so parallel ctest runs could write and import the same file --
which showed up as a random one-test failure in 0.39 seconds and nothing else.
2026-11-20 16:35:02 +08:00
..
2026-11-06 13:54:46 +08:00