Files
R8Forge/docs
dsh 6185f39f34 hardware: spell out what the program medium has to satisfy
Nothing is committed to flash yet, so section 9 now records the constraint that
decides it: the [ skip scans forward but the ] jump scans backward, so whatever
holds the tape must support random access, or the machine has to copy the whole
tape into RAM at boot.  That is why a serial SPI flash cannot execute directly:
it only streams forward.  A parallel flash or EEPROM with an address bus can be
the tape itself (29C010 at 70-150 ns is comfortable at 1 MHz), and on an FPGA the
tape simply lives in block RAM next to the bitstream, no external chip at all.

The packed image the taper pack tool will emit is medium independent on purpose:
the same bytes initialise block RAM, program an EEPROM and drive the RTL
testbench, so M0 does not have to wait for the medium decision.  Paper tape stays
a demo medium only: at 2.54 mm pitch the 577 instruction hello tape is about
1.5 m, and the calculator tape would be 130 m.
2026-11-20 15:49:27 +08:00
..