From e2faeba011f00f44ca3165ce645220374be48083 Mon Sep 17 00:00:00 2001 From: dsh Date: Sun, 15 Nov 2026 18:05:50 +0800 Subject: [PATCH] io: INP writes the whole cell -- the calculator now runs in this machine The serial INP deliberately kept bits 7 and above ("they belong to the frame, leave everything above alone"). That made a tape depend on whatever happened to be in the cell before the read, and the two R8Forge machines do not do it: their -i assignment replaces the whole cell. Measured consequence: examples/calc.r8asm (a 62585 character tape, cell 11, well inside the limit) printed > 0000 / > 0000 / > 0000 here instead of "> 0046", while r8forge_tape_run and r8forge_derive agreed on 62 32 48 48 52 54 10. The digit window and the display were not at fault: drv/calc_disp.r8asm already printed correctly in both machines. INP now writes `frame` (character + parity/stop if framing is on, zeros above) and no longer ORs the old cell back in. With that: rot8_test --cell 11 --input "12 34 + ." calc.rot8 -> > 0046 and the smoke checks are unchanged: serial R8F, -n 512 1536 512, 7E1 A. README and docs/serial.md said bits above the character stay untouched; they now say INP writes the whole cell, which is what every implementation does. --- docs/serial.md | 8 ++++---- src/rot8_io.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/serial.md b/docs/serial.md index 3883ea7..bba4911 100644 --- a/docs/serial.md +++ b/docs/serial.md @@ -3,11 +3,11 @@ 契约(默认模式、选项、`--input` 的两种含义)在 [`README.md`](../README.md) 的「I/O 模式」; 这里放细节和"为什么"。 -## 1. 字符占低 7 位,高位不归 I/O 管 +## 1. `INP` 写整格:字符占低 7 位,其余清零 -串行模式下一个 cell 的低 7 位(bit 0..6)是字符,**bit 7 以及更高的位不归 I/O 管**: -`INP` 只改低 7 位,把原来的高半个 cell 原样留着。所以 tape 可以拿 bit 7 当标志位、长度位或者 -别的什么,而读写字符时它不会被冲掉。想要 char 以外的数据,就放在那上面。 +串行模式下一个 cell 的低 7 位(bit 0..6)是字符,**`INP` 写整格**:bit 7 及以上清零(开了 +parity/stop 时,对应的帧位由 `INP` 填)。早先的版本是"只改低 7 位、高位原样留着",那让纸带的 +行为取决于格子里的旧值 —— 同一份程序在这台机器和 R8Forge 的两台机器上就不一样了。 验证方法:把 cell 预置成 `0x80` 再读一个 `A`,cell 会是 `0xC1`(`-+` 在 8 位下就是把 bit0 的 1 转到 bit7,然后 `,.` 读一个字符再打出来,`--dump` 能看到)。 diff --git a/src/rot8_io.c b/src/rot8_io.c index ded061a..37aeb04 100644 --- a/src/rot8_io.c +++ b/src/rot8_io.c @@ -150,7 +150,7 @@ void rot8_inp_io(rot8_iter *it) { frame |= (rot8_data)1u << ROT8_STOP_BIT; framed |= (rot8_data)1u << ROT8_STOP_BIT; } - rot8_inp(it, (rot8_data)((rot8_out(it) & ~framed) | frame)); + rot8_inp(it, frame); return; } rot8_inp(it, value);