--7e1 is --serial --parity even --stop. One cell carries a whole frame:
bits 0..6 the character, bit 7 the even parity bit, bit 8 the stop bit, which
leaves two bits of an 11 bit cell to the tape.
* --parity none|even|odd: INP fills bit 7 from the character it read, OUT
checks it. --stop does the same for bit 8 being 1. Both imply --serial,
and a stop bit needs cell_size >= 9 (7+1+1).
* OUT still sends the character when a frame is bad, like a UART flagging and
carrying on, but says 'parity error' / 'framing error' on stderr, prints a
summary at the end and exits 4, so a script can test the frame with \True.
* The 7E1 round trip is checked: --7e1 --input A leaves 0x141 = 321 in the
cell (0x41 data, parity 0 because 'A' has two bits set, stop 1) and OUT
accepts it; flipping one data bit gives a parity error, and outputting a
cell with bit 8 clear gives a framing error.
* README: the frame layout, the switches, why the stop bit is one cell bit
(no bit clock: one INP/OUT is a whole frame) and what parity costs in
hardware -- one latching toggle driven by the read head, and the very same
circuit checks a frame if you feed it all 8 bits and expect 0.