Eight bit adders and increments, one bit per cell

raw_add_bits8   A0..A7, B0..B7, S0..S7, carry = 25 cells
raw_inc_bits8   a0..a7, s0..s7, carry       = 17 cells

Both follow the same protocol as the four bit version: no rotation, every cell
holds a single bit, one slice per bit, and the final carry is dropped because
the caller promises the result fits.

The increment slices down to 3 cells -- a, carry (in -> out), s -- and %synth
finds cost 25 in 4 blocks for it: s = a^Ci, carry = a&Ci.  Its table was written
as 8 entries because a 3 parameter stat line wants 2^3 values, and the s bit in
the index does not matter, so the four entry pattern repeats.

One mistake worth recording: set_1 takes no arguments and acts on the current
cell, so 'set_1 %17' silently did nothing and the carry started at 0 instead of
1 -- which made 1+1 give 1 instead of 2 while 42+1 and 200+1 looked fine, since
only the low bit was affected.  The driver now does '.tp %17' then 'set_1'.

Verified on the built in machine:
  raw_add_bits8  9 sums (100+50, 128+127, 200+55, 254+1, ...) 9/9
  raw_inc_bits8  9 values (0, 1, 5, 15, 127, 200, 253, 254, ...) 9/9

Tapes: 2550 and 1514 characters.
This commit is contained in:
dsh committed 2026-11-06 23:02:09 +08:00
1 parent 7cf2fabeb7
commit 1b8ff08455
3 files changed
+74

No files matched your search

+5
View File
@@ -0,0 +1,5 @@
# params 3 mode 0 metric 1
1 4 0
0 6 0
2 3 1
0 6 0
+26
View File
@@ -0,0 +1,26 @@
%include "asm/lib.r8asm"
%include "asm/raw_add_nc4.r8asm"
; 8 位加法器,每一位独占一个干净 cell,不做轮转:
; %1..%8 = A0..A7
; %9..%16 = B0..B7
; %17..%24 = S0..S7
; %25 = 进位
;
; 每个 cell 始终只放一位(0 或 1),所以 set_0 的前提成立;最高位产生的进位丢掉,
; 前提是 A+B <= 255(不进位输出)。
; 总共 25 个 cell:每位 3 个 + 1 个进位。
%macro raw_add_bits8 25
.anchor before_raw_add_bits8
erase %25
bit_add_nc4 %1 %9 %25 %17
bit_add_nc4 %2 %10 %25 %18
bit_add_nc4 %3 %11 %25 %19
bit_add_nc4 %4 %12 %25 %20
bit_add_nc4 %5 %13 %25 %21
bit_add_nc4 %6 %14 %25 %22
bit_add_nc4 %7 %15 %25 %23
bit_add_nc4 %8 %16 %25 %24
.tp before_raw_add_bits8
%endmacro
+43
View File
@@ -0,0 +1,43 @@
%include "asm/lib.r8asm"
; 忽略进位的自增切片,3 个 cell:
; p1..p3 = a, 进位(进->出), s
;
; 目标:s = a^Ci,进位 = a&Ci,a 结束为 0。
; 表由定义直接算出:(a,Ci) = (0,0)->0、(1,0)->4、(0,1)->4、(1,1)->2,
; 也就是只落在「进位」和 s 这两位。s 的初值不影响结果,所以 8 项是这 4 项重复两遍。
%synth bit_inc_nc3_synth
params 3
stat 0 4 4 2 0 4 4 2
metric flat
%endsynth
%macro bit_inc_nc3 3
.tp %3
set_0
bit_inc_nc3_synth %1 %2 %3
%endmacro
; 8 位自增,每位一个干净 cell:
; %1..%8 = a0..a7
; %9..%16 = s0..s7
; %17 = 进位(初值 1,因为 inc 就是 +1)
;
; 最后一位产生的进位丢掉:前提是 a < 255。
%macro raw_inc_bits8 17
.anchor before_raw_inc_bits8
erase %17
; set_1 是不带参数的宏,作用于当前 cell,所以要先 .tp 过去
.tp %17
set_1
bit_inc_nc3 %1 %17 %9
bit_inc_nc3 %2 %17 %10
bit_inc_nc3 %3 %17 %11
bit_inc_nc3 %4 %17 %12
bit_inc_nc3 %5 %17 %13
bit_inc_nc3 %6 %17 %14
bit_inc_nc3 %7 %17 %15
bit_inc_nc3 %8 %17 %16
.tp before_raw_inc_bits8
%endmacro