starcells 5783769db3 Console: records in order, prompt last, no duplicate replay
Three fixes from looking at a real run:

  * input> showed only the last value.  Both console lines now record every
    value (with the same '..' trim as the out box), so a run that read 123 then
    65 shows input> 123 65.
  * output> was printed above input> even though the output happened later.
    The order is now chronological: input record first, output record second,
    and the prompt is a separate empty 'input> ' line under both, so the cursor
    is always the very last thing and nothing can appear above it afterwards.
  * with the console showing output>, replaying every OUT value after the run
    was just noise: replay_output is off now (live still mutes OUT while the
    frame is being drawn, so the values only appear in the console).

Checked with tapes/echo2.rot8 (',.,.'), fed 123 then 65 through a pipe: while
waiting for the second value the console reads 'output> 123' then an empty
'input> ', and at the end 'input> 123 65' / 'output> 123 65' with nothing
printed after.  --input and --dump paths unchanged.
2026-11-06 20:52:25 +08:00
2026-04-18 20:15:58 +08:00
2026-06-12 21:08:08 +08:00

ROT-8

以无ALU为前提设计的1-Bit Brainfuck变体
以及用于测试该指令集的,以C实现的简单虚拟机

概述

ROT-8 ([rəʊˈteɪt]) 提供了一套简洁的指令集,使利用无ALU的各种奇葩元件(如类似差分机的机械计算机,红石电路,甚至是水槽水闸与水车)进行计算变得可行且通用
对,就是蒸汽朋克里最常见的那类东西,不过这个真的可以运行

指令集

ROT-8指令 对应BF字符 行为
STP > 数据指针右移 1 Cell
BTP < 数据指针左移 1 Cell
ROR + 当前 Cell 循环右移 1 bit
FLB - 翻转当前 Cell 的 LSB (最低位)
BIZ [ 如果当前 Cell 的 LSB 为 0,跳到匹配的 ] 之后
RNZ ] 如果当前 Cell 的 LSB 不为 0,跳回匹配的 [ 之后
OUT . 输出当前 Cell
INP , 从输入读取到当前 Cell

方便起见,INP与OUT的实现不做定义,只要INP能改变整个Cell而OUT能读取整个Cell即可.
例如本项目以输入/输出十进制整数作为INP/OUT.

使用

  rot8_test tape

可视化内存

虚拟机可以一边执行 tape,一边把整条纸带(256 个 Cell x 8 bit)画成一张实时视图:

  ./build/rot8_test --live tapes/wave.rot8
+--------------------------------------------------------+
| ROT-8 memory watch                     tapes/wave.rot8 |
+--------------------------------------------------------+
| step    500   pc 01F4/0527   op ROR                    |
+--------------------------------------------------------+
| cell  90/256   value  16 = 0x10  '.'                   |
|    b7  b6  b5  b4  b3  b2  b1  b0                      |
|     .   .   .   #   .   .   .   .                      |
+--------------------------------------------------------+
|      | +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F |
|   00 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   10 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   20 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   30 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   40 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   50 | 01 02 04 08 10 20 40 80 01 02 10 00 00 00 00 00 |
|      |                               ^^                |
|   60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   80 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   90 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   A0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   B0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   C0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   D0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   E0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   F0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
+--------------------------------------------------------+
| out (0)  none yet                                      |
+--------------------------------------------------------+

画面从上到下:

区域 内容
step / pc / op 已经执行的指令数,程序计数器,以及 pc 处即将执行的指令
cell ... value 指针所指 Cell 的编号、十进制值与十六进制值
b7 ... b0 该 Cell 的 8 位,# 为 1,. 为 0
纸带 每行 16 个 Cell,行首是十六进制地址,^^ 标出数据指针
out 到此刻为止 OUT 输出的值(保留最近 10 个)

参数:

选项 说明
-l, --live 运行动画,原地刷新
-d, --dump 结束时打印一张静态快照
-e, --every <n> 每 n 条指令画一帧;0(默认)表示整段动画大约 300 帧
-f, --fps <n> 刷新率上限,默认 30;0 表示不限速
-t, --tty / --no-tty 强制当成/不当成终端(见下)
-k, --compact / --full 强制精简画面/完整画面
-c, --color / --no-color 强制开/关 ANSI 颜色(默认跟随终端)
-i, --input <v...> 预先喂给 INP 的值(空格或逗号分隔)
-h, --help 帮助

不加 --live 与 --dump 时行为与以前完全一致:直接跑完,只留下 OUT 的输出.
--live 期间 OUT 会被画面接管,程序结束后再原样补打出来,所以重定向到文件依然拿到完整的输出.
输出不是终端(被管道/文件接管)时,--live 会退化成逐帧打印,可以直接 less 着看;程序也会在 stderr 上提一句.

画面高度是自动挑的:终端不足 30 行用 24 行的精简版,测不出高度时也先按 24 行来(猜你屏幕不大),--full 可以强制完整版. 用 --tty 之前那套原地重绘才生效,所以如果你的终端其实是通过管道接进来的 (网页版终端、某些 IDE 的面板,程序 _isatty 看不出来),画面会变成一帧帧往下滚 —— 加个 -t 就好了.

输入

INP 现在按这个顺序取值:先吃 --input 排好的队列,再问现场(live 模式),最后才回落到 stdin —— 所以不带 --input、也不开 --live 时行为与以前完全一样.

  rot8_test --input 7,5 tapes/full_adder.rot8    # 脚本/测试:一次喂完
  rot8_test --live tapes/echo.rot8               # 现场:画面下方问 input>

live 模式下画面分两层,框里只记录已经产生的输入输出,提示在框外面:

+--------------------------------------------------------+
| in (2) 123 65                                         |   <- 记录
| out (2) 123 65                                        |   <- 记录
+--------------------------------------------------------+
input> 123 65                                                <- 框外,按发生顺序
output> 123 65

框外那两行都按发生顺序排,并且记录全部值(input> 记喂进去的,output> 记出来的),所以 有了它们之后 --live 结束时就不再重复打印一遍原始输出.

轮到输入时,最下面会多出一行空的 input> 当提示,光标停在那里 —— 敲的数字落在窗口外面, 不会和画面挤在一起;回车之后提示消失,值进到上面的记录行里. 因为提示永远在最下面,不会出现 "后来的输出跑到提示上面"这种次序错乱.

一开头就是 INP 的 tape 也没问题:提示会先把第一帧画出来再问,所以内存的初始状态是看得到的 (为此输入回调拿到了迭代器).

精简画面没有 in/out 框,但只要有输入仍会补一行. 不读输入的 tape 不会多出框外的行,原有 画面完全不变.

stdin 已经关掉(管道读完)时喂 0 并照常跑完,不会卡住. tapes/echo.rot8(内容就是 ,.)是 拿来试这个的最小例子.

构建与测试

构建

mkdir build
cd build
cmake ..
make -j$(nproc)

运行(测试)


  ./build/rot8_test tapes/and.rot8
  ./build/rot8_test tapes/or.rot8
  ./build/rot8_test tapes/full_adder.rot8

  ./build/rot8_test --dump tapes/full_adder.rot8      # 跑完看一眼纸带
  ./build/rot8_test --live tapes/wave.rot8           # 看它把纸带刷成一道波

S
Description
ROT-8 with the live memory visualiser
Readme
407 KiB
0 Stars 1 Watchers 0 Forks
Languages
C 99.6%
CMake 0.4%