starcells b654bd644d Add a live memory view for the tape
The machine can now hand a hook the whole execution, and rot8_viz draws
what it sees: the 256 cell tape as a hex map, the cell under the pointer
with its eight bits, the program counter and the values OUT produced.

    rot8_test --live tapes/wave.rot8     # redraw in place while it runs
    rot8_test --dump tapes/and.rot8      # one static snapshot at the end

Frames are plain ASCII, so the view survives pipes, ssh and logs; colour
is ANSI and only used when the terminal can take it.  Running without
--live or --dump behaves exactly as before: the tape just runs.

rot8.h gains rot8_run_hooked() plus read-only accessors for the tape,
the program counter and the step count, so that tools do not have to
reach into rot8_iter.  read_tape() now reports a missing file and stops
at the end of the buffer instead of writing past it.  Also fixes the
ROR/FLB opcode comments, which had the BF characters the wrong way round.

tapes/wave.rot8 is a small demo: it walks a single set bit across 240
cells, which looks like a wave moving over the tape.
2026-11-05 21:25:42 +08:00
2026-11-05 21:25:42 +08:00
2026-11-05 21:25:42 +08:00
2026-11-05 21:25:42 +08:00
2026-04-18 20:15:58 +08:00
2026-06-12 21:08:08 +08:00
2026-11-05 21:25:42 +08:00

ROT-8

以无ALU为前提设计的1-Bit Brainfuck变体
以及用于测试该指令集的,以C实现的简单虚拟机

概述

ROT-8 ([rəʊˈteɪt]) 提供了一套简洁的指令集,使利用无ALU的各种奇葩元件(如类似差分机的机械计算机,红石电路,甚至是水槽水闸与水车)进行计算变得可行且通用
对,就是蒸汽朋克里最常见的那类东西,不过这个真的可以运行

指令集

ROT-8指令 对应BF字符 行为
STP > 数据指针右移 1 Cell
BTP < 数据指针左移 1 Cell
ROR + 当前 Cell 循环右移 1 bit
FLB - 翻转当前 Cell 的 LSB (最低位)
BIZ [ 如果当前 Cell 的 LSB 为 0,跳到匹配的 ] 之后
RNZ ] 如果当前 Cell 的 LSB 不为 0,跳回匹配的 [ 之后
OUT . 输出当前 Cell
INP , 从输入读取到当前 Cell

方便起见,INP与OUT的实现不做定义,只要INP能改变整个Cell而OUT能读取整个Cell即可.
例如本项目以输入/输出十进制整数作为INP/OUT.

使用

  rot8_test tape

可视化内存

虚拟机可以一边执行 tape,一边把整条纸带(256 个 Cell x 8 bit)画成一张实时视图:

  ./build/rot8_test --live tapes/wave.rot8
+--------------------------------------------------------+
| ROT-8 memory watch                     tapes/wave.rot8 |
+--------------------------------------------------------+
| step    500   pc 01F4/0527   op ROR                    |
+--------------------------------------------------------+
| cell  90/256   value  16 = 0x10  '.'                   |
|    b7  b6  b5  b4  b3  b2  b1  b0                      |
|     .   .   .   #   .   .   .   .                      |
+--------------------------------------------------------+
|      | +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F |
|   00 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   10 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   20 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   30 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   40 | 01 02 04 08 10 20 40 80 01 02 04 08 10 20 40 80 |
|   50 | 01 02 04 08 10 20 40 80 01 02 10 00 00 00 00 00 |
|      |                               ^^                |
|   60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   80 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   90 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   A0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   B0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   C0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   D0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   E0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|   F0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
+--------------------------------------------------------+
| out (0)  none yet                                      |
+--------------------------------------------------------+

画面从上到下:

区域 内容
step / pc / op 已经执行的指令数,程序计数器,以及 pc 处即将执行的指令
cell ... value 指针所指 Cell 的编号、十进制值与十六进制值
b7 ... b0 该 Cell 的 8 位,# 为 1,. 为 0
纸带 每行 16 个 Cell,行首是十六进制地址,^^ 标出数据指针
out 到此刻为止 OUT 输出的值(保留最近 10 个)

参数:

选项 说明
-l, --live 运行动画,原地刷新
-d, --dump 结束时打印一张静态快照
-e, --every <n> 每 n 条指令画一帧;0(默认)表示整段动画大约 300 帧
-f, --fps <n> 刷新率上限,默认 30;0 表示不限速
-k, --compact 精简画面:只画纸带,不画当前 Cell 与输出
-c, --color / --no-color 强制开/关 ANSI 颜色(默认跟随终端)
-h, --help 帮助

不加 --live 与 --dump 时行为与以前完全一致:直接跑完,只留下 OUT 的输出.
--live 期间 OUT 会被画面接管,程序结束后再原样补打出来,所以重定向到文件依然拿到完整的输出.
输出不是终端(被管道/文件接管)时,--live 会退化成逐帧打印,可以直接 less 着看.

构建与测试

构建

mkdir build
cd build
cmake ..
make -j$(nproc)

运行(测试)


  ./build/rot8_test tapes/and.rot8
  ./build/rot8_test tapes/or.rot8
  ./build/rot8_test tapes/full_adder.rot8

  ./build/rot8_test --dump tapes/full_adder.rot8      # 跑完看一眼纸带
  ./build/rot8_test --live tapes/wave.rot8           # 看它把纸带刷成一道波

S
Description
ROT-8 with the live memory visualiser
Readme
407 KiB
0 Stars 1 Watchers 0 Forks
Languages
C 99.6%
CMake 0.4%